Product Overview

Insulated puncture wire clamp (nsulation Piercing Connectors) is mainly composed of insulating shell, puncture blade, waterproof rubber pad and torque bolt. When connecting the cable branch, insert the branch cable into the branch cap and determine the branch position of the main line, tighten the torque nut on the clamp with a socket wrench. With the tightening of the torque nut, the upper and lower insulators of the clamp with hidden puncture blades are gradually closed. At the same time, the arc-shaped sealing rubber pad wrapped around the puncture blades is gradually attached to the cable insulation layer, and the puncture blade also starts to puncture the cable insulation layer and metal conductor. When the sealing degree of the sealing rubber pad and the insulating grease and the contact between the puncture blade and the metal body achieve the desired effect, the torque nut will automatically fall off. At this time, the installation is completed and the contact point sealing and electrical effect are excellent.

Three major advantages

● Easy installation

The cable branch can be made without stripping the insulation of the cable, and the joint is completely insulated. There is no need to cut off the main cable, and the cable can be branched at any position. Easy and reliable installation, only with a socket wrench, can be charged to install

● Safety of use

The joint is resistant to distortion, shockproof, waterproof, flame retardant, anti-corrosion and aging, without maintenance, and has been successfully used for more than 30 years

● Cost savings

The installation space is small, saving bridge and civil costs. Application in construction, no terminal box, tap box, no cable return line, save cable investment. The cost of cable + puncture clamp is lower than that of other power supply systems, which is only about 40% of the plug bus and about 60% of the prefabricated branch cable.

Specifications