News Center

How to store and deposit high temperature line

High-temperature wire is a common high-temperature wire. The working temperature is about minus 80 degrees to minus 250 degrees. It is made of solid or stranded silver-plated or nickel-plated copper wire. It is mainly composed of conductor and insulating layer. The insulator is processed by PFA Teflon. Then storage and storage will definitely be involved when using high-temperature wire. How to store and store high-temperature wire? Next, let's learn about it.

High temperature line is very taboo water, once the water is difficult to dry, even if the drying of the moisture in the meantime, will also have a negative impact on the high temperature wire, constitute a safety hazard, so how to prevent the high temperature wire water?

1, do a good job of sealing, sawed off the cable end, to choose the cable special sealing sleeve, to prevent moisture from entering.

2. After the laying of high-temperature wires, the cable head should be manufactured in time to prevent moisture from entering from the end.

3. Strengthen the handling of the cable head manufacturing process. Once the cable enters water, the wire head is well manufactured and can extend the entire life of the cable.

4. Branch boxes are selected for storage to store high-temperature wires in sections and will not spread to other sections.

Then let's find out how to properly store the high temperature line:

1, prohibit contact with acid, alkali and mineral oil, to be separated from these corrosive substances;

2. During the storage period, the high-temperature wire should be rolled regularly. When rolling, the side of the storage plate will be rolled upward to prevent the bottom surface from being damp and decayed. When depositing, always pay attention to whether the head is intact;

3, as far as possible to prevent the exposure of high-temperature wires in the open air;

4. There shall be no harmful gas that damages insulation and corrodes metals in the warehouse where high-temperature wires are stored;

5. The storage period of the high-temperature line is limited to the ex-factory period of the product, generally not more than one and a half years, and not more than two years, depending on the application instructions of the product.